Crown (Middleby) GS-40-QS Braising Pans & Tilt Skillets

Crown GS-40 Gas Tilting Skillet – 40 Gallons / 152 L

Replace multiple pieces of equipment with one powerhouse. The Crown GS-40 braises, sautés, pan-fries, steams and holds up to 40 gallons (152 L) of product—all while delivering even, controllable heat and effortless pour-off. Built for high-volume commercial kitchens, this gas-fired tilting skillet pairs rugged 304 stainless construction with precise solid-state temperature control for dependable, repeatable results shift after shift.

Why You’ll Love It

• Big-batch capacity: 40 gal (152 L) pan formed from 10-gauge 304 stainless with coved corners for fast cleanup.
• Even heat, every corner: ¾" triple-ply cooking surface with a ⅜" aluminum core distributes 125 k BTU evenly over the entire pan.
• Manual gearbox tilt: Self-contained, permanently lubricated mechanism provides smooth, controlled pouring.
• Spring-assisted cover: Full-width handle, no-drip condensate guide and vent port with swing cover keep operators safe and dry.
• Solid-state thermostat: 100–450 °F (38–232 °C) set-point with green “Ignition” and red “Heat” indicator lights.
• Built-in safeguards: Electronic ignition, high-limit cut-off at 500 °F (260 °C) and tilt switch that shuts burners off when pan is raised more than 5°.
• Easy pour-off: Sloped front, removable stainless pour strainer and optional 2" or 3" draw-off valves.
• Rock-solid frame: 1 ⅝" square tubular stainless base with adjustable bullet feet (front) and flanged feet (rear) for floor anchoring.
• Certified for the line: CSA Star, CSA Flame and NSF listings for gas safety and sanitation.

Specifications

*Height measured to pan lip; allow additional clearance for open cover.

Popular Accessories (Sold Separately)

• 2" or 3" draw-off valve with strainer
• Sliding drain pan (Model S-SDP-2)
• Etched liter/gallon markings
• Pan carrier or half-size pan carrier
• Single or double pantry faucets with swing spout and/or spray hose

Intended for commercial use on non-combustible floors only. Installation must conform to local codes and the latest edition of the National Fuel Gas Code. Professional installation recommended.